Mountain DISC SURFACE PREP 2IN COURSE 25BOX
$29.99Part#:8480
- Coarse Grade
- Maximum Operating Speed-25,000 rpm
- For cleaning and finishing on all metals
- For removal of light rust, oxides and coatings
- 25 per box
Showing 177–192 of 256 results
-
-
-
Sale!
Norton Abrasives 6″ CYCLONIC MULTAIR DISCS 180GR 50/PK
Original price was: $49.99.$45.99Current price is: $45.99.Part#:7775
- Precision laser-cut, spiral-hole design based on the Golden Ratio
- Maximum dust extraction for cleaner work environment and less potential for contamination in the shop
- Consistent cut throughout the life of the disc
- Norton SG ceramic alumina grain for the entire grit range
- Superior cut on difficult to sand surfaces
-
Sale!
Norton Abrasives CHAMPAGNE MAGNUM 2 3/4″ X 45YD PSA 220g
Original price was: $75.99.$68.49Current price is: $68.49.Part#:31686
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper. No system holds better or fastens more easily than Speed-Grip. Stick and Sand Sheet Rolls are PSA Backed, so you can peel them off easily and stick them on any length, quickly. Use on hand sanding blocks, file shoes or file boards. Fits sheet-roll dispenser 42773Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
-
Norton Abrasives NORTON BLAZE 36 GRIT TR DISC/25 DISC PER BO
$60.99Part#:62328
Speed-Lok TR discs allow for quick, tool-free disc change and increased production. They twist on and twist off and lock securely to the back-up pad. Norton SG Blaze self-sharpening design is ideal for high-pressure, heavy metal removal applications.
-
Norton Abrasives SANDING SPONGE SUPER FINE 20 PK
$59.99Part#:03076
- Durable, abrasive coated foam for lasts up to 5x longer than sandpaper, resistant to tear
- Superior flexibility; for hand-sanding or finishing flat, curved, contoured and hard-to-reach areas on wood, metal, composites, paint and solid surfaces
- Washable for long life, rinse and reuse
- Coated on one side on premium foam to generate extremely consistent and uniformly fine scratch patterns necessary for applications such as sealer sanding and sanding between coats of primer or top coats
- Various sizes and grit combinations for maximum versatility and flexibility for application needs
-
OTC Adjustable Gland Nut Wrench
$199.99Part#:1266
OTC’s fully adjustable, 2 to 6 inch (pin to pin) capacity, Gland Nut Wrench fits hydraulic cylinder gland nuts on most farm and construction equipment. Reversible pins are sized at 1/4 inch and 5/16 inch to accommodate most applications. Designed for use with a 3/4 inch drive ratchet or breaker bar, this tool can take the torque you dish out. High-grade materials ensure quality performance over the lifetime of the tool. Replacement pins (No. 204928) are available separately. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment.
-
OTC Battery Powered Continuity Tester
$36.29Features and Benefits:
- Designed to test any type of non-live electrical circuit
- Track down broken wires, bad grounds and blown fuses quickly
- Heavy-duty stainless steel probe with insulated shaft and heavy-duty clip with positive soldered connection
- Features an ergonomic slim designed clear handle
- 12 feet coil cord and low voltage replaceable bulb
-
Sale!
OTC Brake Caliper Pin/Bolt Remover Set
Original price was: $200.00.$189.99Current price is: $189.99.Brake caliper pins allow the caliper to float on the rotor, but many times these become siezed causing excessive brake pad and rotor wear. Work equally as well on bolts in non threaded holes. Will not damage pin or bolt like a chisel or punch could.
-
OTC Brake Piston Removal Locking Pliers
$69.99This specially designed locking plier allows the removal of brake caliper pistons during service or rebuild. The plier is simply clamped into the I.D. of the caliper piston allowing it to be pulled out of the caliper.
-
OTC Gland Nut Wrench Replacement Pin for OTC1266
$19.99Part#:204928
OTC’s fully adjustable, 2 to 6 inch (pin to pin) capacity, Gland Nut Wrench fits hydraulic cylinder gland nuts on most farm and construction equipment. Reversible pins are sized at 1/4 inch and 5/16 inch to accommodate most applications. Designed for use with a 3/4 inch drive ratchet or breaker bar, this tool can take the torque you dish out. High-grade materials ensure quality performance over the lifetime of the tool. Replacement pins (No. 204928) are available separately.
- Replacement pin for OTC1266 Adjustable Gland Nut Wrench
-
-
Sale!
PF/2 Energizer & WDI EcoFlush Upgrade Kit for Two-Piece Toilets (1.6 GPF)
Original price was: $219.99.$209.99Current price is: $209.99.PF/2 Energizer & WDI EcoFlush Upgrade Kit for Two-Piece Toilets (1.6 GPF)
The M-101526-F31K Flushmate system includes the necessary hardware to retrofit into toilets with WDI EcoFlush B8100, B8104, B8106, B8106S, or PF/2 Energizer 150-403. Easy installation.
-
Sale!
Portasol Plastic Welding Kit
Original price was: $169.99.$159.99Current price is: $159.99.Part# PP75
A cordless kit for plastic welding repair, easy to use the Portasol PP75 requires no special training. The plastic welder transfers heat through contact so there is no oxidation of parts by hot air. A reliable professional tool made from butane compatible plastics and featuring an ultrasonically welded tank prevents gas leaking and adds strength and durability. Packed in a robust carry and transport case.
-
Sale!
Portasol Pz50 Plastic Welding Kit
Original price was: $79.99.$69.99Current price is: $69.99.Part# PZ50PWK
The Pz50 plastic welding kit is a cordless butane gas powered repair tool. The Pz50 is a portable, compact and easy to use kit and suits a wide variety of projects. All components fit into a handy case. The Pz50 plastic welding kit is perfect for mechanics / DIYers to carry out plastic repairs to broken bumper tabs, headlights brackets and small dent repairs and to complement other plastic welding repair methods and tools.
-
Sale!
Power Probe – Test Probe Adapter Kit
Original price was: $30.00.$19.99Current price is: $19.99.part #: PWP-PPTK0005
- Back Probe and blade Probe adapters
- Allows for pinpoint diagnostic testing
- 4mm banana plugs
- Blade Probe allows for terminal testing at fuses, sockets, or Connecters
- Back Probe terminals without damaging the component