Abrasives

Air Conditioning

Brake Tire & Suspension

Door Hardware

Electronics

  • Norton Abrasives SANDING SPONGE SUPER FINE 20 PK

    Norton Abrasives SANDING SPONGE SUPER FINE 20 PK

    $59.99

    Part#:03076

    • Durable, abrasive coated foam for lasts up to 5x longer than sandpaper, resistant to tear
    • Superior flexibility; for hand-sanding or finishing flat, curved, contoured and hard-to-reach areas on wood, metal, composites, paint and solid surfaces
    • Washable for long life, rinse and reuse
    • Coated on one side on premium foam to generate extremely consistent and uniformly fine scratch patterns necessary for applications such as sealer sanding and sanding between coats of primer or top coats
    • Various sizes and grit combinations for maximum versatility and flexibility for application needs
    Add to cartDone
  • OTC Adjustable Gland Nut Wrench

    OTC Adjustable Gland Nut Wrench

    $199.99

    Part#:1266

    OTC’s fully adjustable, 2 to 6 inch (pin to pin) capacity, Gland Nut Wrench fits hydraulic cylinder gland nuts on most farm and construction equipment. Reversible pins are sized at 1/4 inch and 5/16 inch to accommodate most applications. Designed for use with a 3/4 inch drive ratchet or breaker bar, this tool can take the torque you dish out. High-grade materials ensure quality performance over the lifetime of the tool. Replacement pins (No. 204928) are available separately. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment.

    Add to cartDone
  • OTC Battery Powered Continuity Tester

    OTC Battery Powered Continuity Tester

    $36.29

    Features and Benefits:

    • Designed to test any type of non-live electrical circuit
    • Track down broken wires, bad grounds and blown fuses quickly
    • Heavy-duty stainless steel probe with insulated shaft and heavy-duty clip with positive soldered connection
    • Features an ergonomic slim designed clear handle
    • 12 feet coil cord and low voltage replaceable bulb
    Add to cartDone
  • Sale! OTC Brake Caliper Pin/Bolt Remover Set

    OTC Brake Caliper Pin/Bolt Remover Set

    Original price was: $200.00.Current price is: $189.99.

    Brake caliper pins allow the caliper to float on the rotor, but many times these become siezed causing excessive brake pad and rotor wear. Work equally as well on bolts in non threaded holes. Will not damage pin or bolt like a chisel or punch could.

    Add to cartDone
  • OTC Brake Piston Removal Locking Pliers

    OTC Brake Piston Removal Locking Pliers

    $69.99

    This specially designed locking plier allows the removal of brake caliper pistons during service or rebuild. The plier is simply clamped into the I.D. of the caliper piston allowing it to be pulled out of the caliper.

    Add to cartDone
  • OTC Gland Nut Wrench Replacement Pin for OTC1266

    OTC Gland Nut Wrench Replacement Pin for OTC1266

    $19.99

    Part#:204928

    OTC’s fully adjustable, 2 to 6 inch (pin to pin) capacity, Gland Nut Wrench fits hydraulic cylinder gland nuts on most farm and construction equipment. Reversible pins are sized at 1/4 inch and 5/16 inch to accommodate most applications. Designed for use with a 3/4 inch drive ratchet or breaker bar, this tool can take the torque you dish out. High-grade materials ensure quality performance over the lifetime of the tool. Replacement pins (No. 204928) are available separately.

    • Replacement pin for OTC1266 Adjustable Gland Nut Wrench
    Add to cartDone
  • OTC MINI TUBING CUTTER

    OTC MINI TUBING CUTTER

    $19.99

    Part#: 6514

    Works on tubing sizes 1/8″ to 5/8″ O.D. (3 mm to 16 mm). Easily cuts copper, brass, aluminum, and steel brake lines in hard-to-reach places. Ream folds onto cutter body for storage. Extra cutting wheel stored under ream.

    Add to cartDone
  • Sale! Petcock Socket Set

    Petcock Socket Set

    Original price was: $24.99.Current price is: $22.99.

    THX485

    Part No. 4851/4″ drive set includes a steel universal socket to fit radiators, engine blocks, storage tanks, etc. with an O-ring to hold a 7/8″ wrench in place. Set also has a molded plastic socket to fit narrow wing plastic drain fittings, both plug and flow-through types.

     

    Add to cartDone
  • Sale! PF/2 Energizer & WDI EcoFlush Upgrade Kit for Two-Piece Toilets (1.6 GPF)

    PF/2 Energizer & WDI EcoFlush Upgrade Kit for Two-Piece Toilets (1.6 GPF)

    Original price was: $219.99.Current price is: $209.99.

    PF/2 Energizer & WDI EcoFlush Upgrade Kit for Two-Piece Toilets (1.6 GPF)

    The M-101526-F31K Flushmate system includes the necessary hardware to retrofit into toilets with WDI EcoFlush B8100, B8104, B8106, B8106S, or PF/2 Energizer 150-403. Easy installation.

    Add to cartDone
  • Sale! Portasol Plastic Welding Kit

    Portasol Plastic Welding Kit

    Original price was: $169.99.Current price is: $159.99.

    Part# PP75

    A cordless kit for plastic welding repair, easy to use the Portasol PP75 requires no special training. The plastic welder transfers heat through contact so there is no oxidation of parts by hot air. A reliable professional  tool made from butane compatible plastics and featuring an ultrasonically welded tank prevents gas leaking and adds strength and durability. Packed in a robust carry and transport case.

    Add to cartDone
  • Sale! Portasol Pz50 Plastic Welding Kit

    Portasol Pz50 Plastic Welding Kit

    Original price was: $79.99.Current price is: $69.99.

    Part# PZ50PWK

    The Pz50 plastic welding kit is a cordless butane gas powered repair tool. The Pz50 is a portable, compact and easy to use kit and suits a wide variety of projects. All components fit into a handy case. The Pz50 plastic welding kit is perfect for mechanics / DIYers to carry out plastic repairs to broken bumper tabs, headlights brackets and small dent repairs and to complement other plastic welding repair methods and tools.

    Add to cartDone
  • Sale! Power Probe - Test Probe Adapter Kit

    Power Probe – Test Probe Adapter Kit

    Original price was: $30.00.Current price is: $19.99.

    part #: PWP-PPTK0005

    • Back Probe and blade Probe adapters
    • Allows for pinpoint diagnostic testing
    • 4mm banana plugs
    • Blade Probe allows for terminal testing at fuses, sockets, or Connecters
    • Back Probe terminals without damaging the component
    Add to cartDone
  • Sale! Power Probe 4 master combo kit

    Power Probe 4 master combo kit

    Original price was: $450.00.Current price is: $399.99.

    The Power Probe 4 master combo kit combines the Power Probe 4, ECT3000 & Gold Series lead set to provide the ultimate combination of diagnostic and circuit testing capabilities. The Power Probe 4 simplifies the testing of fuse boxes, verifies correct operation of motors, lights, relays, sensors, wires, communications circuits and computer drivers. The PPECT3000 will help you trace short and open circuits quickly and accurately.

    Features:

    • PP4
    • Supply Power or Ground for Functional Component Testing
    • Self-Resetting Thermal 8 Amp Circuit Breaker
    • Multiple DC Volt readings on the same display
    • Ohmmeter provide active feedback
    • 12 – 24 Volt Range
    • Bad Ground Indicator
    • Continuity Tester
    Add to cartDone
  • Power Probe ECT3000 Electrical Short & Open Finder

    Power Probe ECT3000 Electrical Short & Open Finder

    $195.99

    Part# PECT3000

    The new Power Probe ECT3000 electrical short and open Finder makes locating short and open circuits quickly and more accurately than ever before. When the ECT3000 transmitter is connected to an isolated circuit, it will quickly determine if the circuit has an open or if the circuit is shorted to ground. The ECT3000 receiver is designed to detect the signal emitted from the transmitter notifying you open 8 inches of adjustable height sensitivity allows.

    Add to cartDone
  • Power Probe PP3CSCARB Power Probe 3 Carbon Fiber

    Power Probe PP3CSCARB Power Probe 3 Carbon Fiber

    $139.99

    Part#  PP3CSCARB

    The Power Probe 3 is a Digital Voltmeter that works off of 12-24 Volt sources, with the ability to apply Power and Ground. Using an Auxiliary Ground cable to check continuity and test components, the tool is protected by an 8 Amp Circuit Breaker.

    Add to cartDone
  • Sale! Power Probe PPMT Micro Torch

    Power Probe PPMT Micro Torch

    Original price was: $73.99.Current price is: $56.06.

    The Power Probe Micro Torch is both versatile and powerful. Perfect for Automotive or Home use. It features an electronic ignition allowing for easy startup, and flame adjustment from 1/2″ to 2 1/2″. The PPMT is easily refillable with butane and will last up to 2 hours between refills.

    Add to cartDone